Trang chủ » C/C++ » Using memset(), memcpy(), and memmove() in C

Using memset(), memcpy(), and memmove() in C


The memset() Function

To set all the bytes in a block of memory to a particular value, use memset(). The function prototype is

void * memset(void *dest, int c, size_t count);

 

The argument dest points to the block of memory. c is the value to set, and count is the number of bytes, starting at dest, to be set. Note that while c is a type int, it is treated as a type char. In other words, only the low-order byte is used, and you can specify values of c only in the range 0 through 255.

Use memset() to initialize a block of memory to a specified value. Because this function can use only a type char as the initialization value, it is not useful for working with blocks of data types other than type char, except when you want to initialize to 0. In other words, it wouldn’t be efficient to use memset() to initialize an array of type int to the value 99, but you could initialize all array elements to the value 0. memset() will be demonstrated in program below.
The memcpy() Function

memcpy() copies bytes of data between memory blocks, sometimes called buffers. This function doesn’t care about the type of data being copied–it simply makes an exact byte-for-byte copy. The function prototype is

void *memcpy(void *dest, void *src, size_t count);

 

The arguments dest and src point to the destination and source memory blocks, respectively. count specifies the number of bytes to be copied. The return value is dest. If the two blocks of memory overlap, the function might not operate properly–some of the data in src might be overwritten before being copied. Use the memmove() function, discussed next, to handle overlapping memory blocks. memcpy() will be demonstrated in program below.
The memmove() Function

memmove() is very much like memcpy(), copying a specified number of bytes from one memory block to another. It’s more flexible, however, because it can handle overlapping memory blocks properly. Because memmove() can do everything memcpy() can do with the added flexibility of dealing with overlapping blocks, you rarely, if ever, should have a reason to use memcpy(). The prototype is

void *memmove(void *dest, void *src, size_t count);

 

dest and src point to the destination and source memory blocks, and count specifies the number of bytes to be copied. The return value is dest. If the blocks overlap, this function ensures that the source data in the overlapped region is copied before being overwritten. Sample program below demonstrates memset(), memcpy(), and memmove().

A demonstration of memset(), memcpy(), and memmove().

/* Demonstrating memset(), memcpy(), and memmove(). */
#include <stdio.h>
#include <string.h>
char message1[60] = "Four score and seven years ago …";
char message2[60] = "abcdefghijklmnopqrstuvwxyz";
char temp[60];
main()
{
    printf("\nmessage1[] before memset():\t%s", message1);
    memset(message1 + 5, `@’, 10);
    printf("\nmessage1[] after memset():\t%s", message1);
    strcpy(temp, message2);
    printf("\n\nOriginal message: %s", temp);
    memcpy(temp + 4, temp + 16, 10);
    printf("\nAfter memcpy() without overlap:\t%s", temp);
    strcpy(temp, message2);
    memcpy(temp + 6, temp + 4, 10);
    printf("\nAfter memcpy() with overlap:\t%s", temp);
    strcpy(temp, message2);
    printf("\n\nOriginal message: %s", temp);
    memmove(temp + 4, temp + 16, 10);
    printf("\nAfter memmove() without overlap:\t%s", temp);
    strcpy(temp, message2);
    memmove(temp + 6, temp + 4, 10);
    printf("\nAfter memmove() with overlap:\t%s\n", temp);
}

message1[] before memset():     Four score and seven years ago …
message1[] after memset():      Four @@@@@@@@@@seven years ago …
Original message: abcdefghijklmnopqrstuvwxyz
After memcpy() without overlap: abcdqrstuvwxyzopqrstuvwxyz
After memcpy() with overlap:    abcdefefefefefefqrstuvwxyz
Original message: abcdefghijklmnopqrstuvwxyz
After memmove() without overlap:        abcdqrstuvwxyzopqrstuvwxyz
After memmove() with overlap:   abcdefefghijklmnqrstuvwxyz

ANALYSIS: The operation of memset() is straightforward. Note how the pointer notation message1 + 5 is used to specify that memset() is to start setting characters at the sixth character in message1[] (remember, arrays are zero-based). As a result, the 6th through 15th characters in message1[] have been changed to @.

When source and destination do not overlap, memcpy() works fine. The 10 characters of temp[] starting at position 17 (the letters q through z) have been copied to positions 5 though 14, where the letters e though n were originally located. If, however, the source and destination overlap, things are different. When the function tries to copy 10 characters starting at position 4 to position 6, an overlap of 8 positions occurs. You might expect the letters e through n to be copied over the letters g through p. Instead, the letters e and f are repeated five times.

If there’s no overlap, memmove() works just like memcpy(). With overlap, however, memmove() copies the original source characters to the destination.

DO use memmove() instead of memcpy() in case you’re dealing with overlapping memory regions.

DON’T try to use memset() to initialize type int, float, or double arrays to any value other than 0.

If this tutorial doesn’t answer your question, and you have a specific question, just ask an expert here. Post your question to get a direct answer.

Source : http://www.java-samples.com/showtutorial.php?tutorialid=591

Bình luận

Mời bạn điền thông tin vào ô dưới đây hoặc kích vào một biểu tượng để đăng nhập:

WordPress.com Logo

Bạn đang bình luận bằng tài khoản WordPress.com Log Out / Thay đổi )

Twitter picture

Bạn đang bình luận bằng tài khoản Twitter Log Out / Thay đổi )

Facebook photo

Bạn đang bình luận bằng tài khoản Facebook Log Out / Thay đổi )

Google+ photo

Bạn đang bình luận bằng tài khoản Google+ Log Out / Thay đổi )

Connecting to %s